Hi-Fi audio shipped worldwide in 3-4 days via FedEx.
Powerful yet simple design for audiophiles.
Crystal-clear, high-res sound with wired and wireless connectivity.
Premium craftsmanship, made in Korea.
Cable No. 1
RCA Female-RCA Male Cable (Length: 1 m)
In collaboration with an artisan who has a lot of experience in audio cable production, this cable is optimized for high-quality transmission from SLASH.
German SOMMER's GOBLIN grade OFC [Oxygen-Free Copper] Cable and Australian Amphenol's RCA Plug were used, and the solder connection part was made using silver lead.
check_circle In Stock
Cable No. 1
[Quad DAC ES9219]
expand_more
The ESS Quad DAC ES9219 delivers the best audio quality available today
[LDAC, aptX adaptive, aptX HD]
expand_more
We are proud of being a leader of Hi-fi Receiver Market by applying all three of the world’s hottest high-quality codecs to support our audiophiles.
Ultra-low noise LDO (Low Drop-Out regulator)
expand_more
The most affecting sound quality in audio equipment is that the complex noise generated by many parts on the PCB board degrades the sound quality. Slash is designed to use actively high-quality LDOs that can remove ultra-low noise.
This allows you to enjoy high-quality music by preventing unwarranted noise from affecting the audio quality.
*PSRR(Power supply rejection ratio) 1/79432 times noise improvement effect.
Experience a new level of audio excellence with the Revolutionary Slash series.
✓ World’s best Bluetooth chipset Qualcomm QCC5125 applied.
✓ World’s top 3 high-quality Bluetooth codecs applied. [LDAC, aptX adaptive, aptX HD]
✓ The ESS's high-quality Quad DAC ES9219 applied
✓ Plug-and-play high-performance USB DAC is applied. (No driver installation required)
✓ Optical Input
✓ Optical Output
✓ Application of high-performance LPF chip dedicated to audio.
✓ Ultra-low noise LDO (Low Drop-Out regulator)
✓ Headphone Built-in amplifier
Enjoy unlimited high-quality music with your current Hi-Fi Audio system, headphones, and DAC.
Slash wirelessly receives audio from all smart devices with built-in Bluetooth function. Stream the best audio out there to your Hi-Fi Audio system, headphones, or DAC.
Unveiling the Supremacy of Bluetooth & USB DAC Amp Sound Quality
Slash is an audio application that emphasizes a dedicated high-performance LPF chip, delivering an exceptional audio experience through perfect collaboration with ESS's Quad DAC ESS9219.
Users can enjoy high-quality music, immersive soundtracks, and captivating audio.
Professional DAC Amp for Wired Headphones
Experience the ES9219 DAC amp, delivering smooth and delicate audio with occasional bursts of powerful and exhilarating sound.
RCA Plug - Pure 24k Gold & High-Purity Copper
(No driver installation required)
Plug-and-play high-performance USB DAC is applied.
Slash6 supports up to 24bit/96kHz and allows you to listen to all types of high-quality sound sources through a computer just by connecting a computer and a USB cable.
Optical Input
Connect the Optical output of any audio system (TV, CD Player, etc.) to the Slash6's Optical input to hear high-quality audio via the Slash 6's built-in Quad DAC.
Optical Output
You can listen to your own Bluetooth sound by connecting the optical output of Slash6 to the optical input of a hi-fi receiver and dedicated DAC.
*The Quad DAC built into Slash is not used.
Multi-function button dedicated to user convenience
Initializes the system and disconnects the previously paired smart device while helping to pair with a new device.
If the unit does not power on
expand_more
- Check the adapter's functionality. Try using a different adapter and see if the device powers on. If it does, replace the faulty adapter.
- Try using different USB C-type cables and see if the device powers on. If it does, use a new USB C cable.
- Ensure the device is not overheated. If you notice excessive heat or smell of burning, unplug the power immediately and contact the service center for assistance.
If you have connected your SLASH3/6 to your smartphone but you cannot hear any sound
expand_more
- Increase the volume level on your smartphone. This will not affect the sound quality even at the maximum level.
- Make sure that the amp, speaker, or other device that you are using has the correct input source selected for the SLASH3/6.
- Adjust the volume of the amp and speaker to a suitable level.
- Restart your smartphone and reconnect the SLASH3/6.
If you have trouble connecting your SLASH3/6 to your smartphone via Bluetooth
expand_more
- Press and hold the MFB (LED button) on the back of your SLASH3/6 for more than 1 second.
- Wait until the blue LED flashes once per second.
- On your smartphone, go to Bluetooth settings and disconnect or unregister the existing SLASH3/6.
- On your smartphone, go to Bluetooth settings and re-search or find SLASH3/6 and register it again.
- If the connection is successful, you will see the green LED flash three times and repeat every 2 seconds.
Q. Can I connect to a vacuum tube amplifier, preamplifier, or old analog amplifier?
expand_more
Q. Do I have to connect every time I use SLASH?
expand_more
Q. Do I need to charge a SLASH?
expand_more
Q. How do I know which is the left and right RCA connector?
expand_more
Q. If the smartphone volume is maximum, the sound is strange.
expand_more
If the output is larger than the input of the amp and speaker, lower the volume of your smartphone and adjust the volume of the amp and speaker to use it
Q. Is there a way to optimize it with SLASH and listen to sound quality?
expand_more
After connecting to Bluetooth, it is recommended to set the maximum volume on the device and then adjust the volume to your liking in the amplifier.
Q. One side only makes sound. There is noise only from one side. The sound is strange from one side.
expand_more
To fix this problem, follow these steps.
- Connect SLASH3/6 to RCA output (left and right output) in reverse.
-For example, if the right side did not make sound, check if the left side does not make sound now.
-If this is the case, get A/S inspection.
-If the right side still does not make sound, check the amp, speaker, and cable.
Q. Should I push RCA connectors all the way in when connecting them to the amplifier?
expand_more
RCA connectors are precisely crafted with CNC, so they may feel a bit tight when initially connecting them to the amplifier or extension cables. There's nothing wrong with the product, so please push them all the way in for a proper connection. If they are not fully inserted, the playback volume may be low, so in such cases, please ensure that the RCA connectors are securely connected to the amplifier.
Q. When using SLASH, the connection with Bluetooth is not working well. What should I do?
expand_more
SLASH is a 1:1 channel, so if you are already connected to another device, there may be no signal. Please press the LED (MFB button) on the back of SLASH. You can reset it automatically and use the SLASH and Bluetooth connection.
Q.What type of DC adapter should I use?
expand_more
Slash is carefully designed to accommodate various types of adapters. You can conveniently use a variety of adapters to make the most of your Slash experience. The recommended power adapter is 5V 1A.
Row
expand_more
Add relevant text content with the richtext editor. Note that you can also include links and basic formatting in this content, e.g. bold and italic.
Row
expand_more
Add relevant text content with the richtext editor. Note that you can also include links and basic formatting in this content, e.g. bold and italic.
Row
expand_more
Add relevant text content with the richtext editor. Note that you can also include links and basic formatting in this content, e.g. bold and italic.